Tag Archives: HC-110

Polaroid ProPack Revisited (with old non-instant film)

With the broken rollers and pinholes in the bellows, I felt like this camera didn’t get a fair shake. This will probably make more sense if you see the original post first.

I had some unopened film in the freezer…

Here’s the film:

VERSAPAN GAFSTAR - not kidding about the heavy base. This stuff is thick.

VERSAPAN GAFSTAR – not kidding about the heavy base. This stuff is thick.

Type 2831.

Type 2831.

It's only 46 years expired. Piece of cake.

It’s only 46 years expired. Piece of cake.

100 pack film is 3.25×4.25 inches so this is a little too tall to fit in a film pack. I trimmed it in the dark bag. My cutter won’t fit in the bag so I used scissors. It came out as an irregular quadrilateral rather than a rectangle but it fit.

I haven’t repaired the bellows so I wrapped it, similar to the job on the Kodak Six-20.

The paper that was around the film roll and black console tape.

The paper that was around the film roll and black console tape.

And finally…
An image!

An image!

The setting for original pack film on the camera is ISO 80 but Fujifilm FP100-C works without adjustment. From what I can find (not much) the GAF Versapan was ISO 125 when new. I’ve had it frozen but I don’t know its history so I figured it lost some speed. I got it backwards in my head and adjusted the Polaroid’s exposure dial to darken about 1/2 click. It is a bit dark but I didn’t have to do much post-processing, just cropping and dust cleanup, so I think this film is still ISO 100-ish. Developed for 5 minutes in HC-110 dilution B (1+31). I’ll have to do more testing. Now that I know it works and have a rough idea of speed, I can make 116 film and use some more ancient cameras!

One final note. It’s pan film, as in panchromatic, but the color sensitivities are interesting. And… never mind the cats knocked the balloons off the chair so I can’t map the colors. Any way, the colors are interesting. More testing to come.

Developing Ancient Polaroid Pack Film Negatives

Update 1 March 2019
Trying to date a print I found with the camera, I looked up the date codes on the back of the positives. The film is not as old as I thought. It’s Type 667, the successor to the 107C film referenced below. Using the documents from the Phound Photo entry, the B&W film with manufacturing code E1V142801H is:

Made after 1996 (from the format of the code).
E=made in May.
1=2001 (the first 1 year after 1996).
V=made at the Vale of Leven plant in Scotland.
14=identifies it was made on machine #14.
28=shift A on 10th of month.
01=component change (I have no idea what this means).
H=Type 667 film (coaterless, 10 frames per pack).
End of Update 1 March 2019

I got another pack film camera, a 100 with the Zeiss rangefinder from a 250. It had a pack of Polaroid Type 107 3000 B&W film in it. I pulled one on the very long odds that the developing pods might be good. Nope, dry as a bone. I put a battery in the camera and tried the shutter and it seems to work fine.

I pulled the shutter test frame out of the camera in a dark bag and tried developing it. I’d read somewhere that you could develop the negatives from pack film but I’d never seen an example or tried it. On one Flickr discussion group, someone suggested you could treat it like old Kodak Panatomic-X. So, I had to dig for developing info about one extinct film (according to Wikipedia, Panatomic-X hasn’t been made since 1987) so I could try it on another extinct film.

The instructions I got with the 107 film in the camera call for coating the prints. The coater-less version, 107C, came out in 1978. I don’t know if Polaroid kept making 107 after 107C came out but even 107C hasn’t been made since 1998. If I’d realized it was that old I might have saved a frame. Probably not, the first thing people do when looking at an old camera in a thrift shop is to open it. Any way, the instructions I found called for HC-110 dilution B (1+31) at 68F for 4.5 minutes.

I don’t have any normal tanks that can develop large format negatives. The Polaroid image (excluding the border) is 7.3 X 9.5cm. In one of those “buy the lot to get the one thing you want” purchases, I got a Cibachrome color processing drum (PDF manual). It was made to do prints without using a series of open trays. Cibachrome was an awesome process, direct to positive, full color prints. Sadly, I learned about it too late. It too is an extinct product.

This is the shutter test shot. Developed in HC-110, dilution H (1+63) at 68F for 9 minutes. I frequently use half the concentration for twice the time. It’s a little gentler on old negatives (old paper negative in this case) and it helps to have a little time leeway. The results are pretty similar to HC-110 B. This was a go/no-go test so getting anything was the goal.

Negative image taken with my iPhone.

Negative image taken with my iPhone.

No idea what it is but it’s not my target, the kitchen lights. I tried bleaching the negative but all I did was take off some of the emulsion.

A proper scan at 600 DPI after the bleaching attempt.

A proper scan at 600 DPI after the bleaching attempt.

The scan inverted.  Still no idea -- probably nothing.

The scan inverted. Still no idea — probably nothing.

I had nothing but variables: an unknown film, shot in an unknown camera, developed with an unknown process. I know, I’ll use a different camera I haven’t tested!

I pulled the remaining three frames out of the film pack and put them into a light tight box. Wrangling a Polaroid and a box in a small changing bag is an exercise in patience. Once that was done, I removed the extra paper, developing pods, and positives, leaving just the negatives emulsion side up (I think) in the box. The next magic act was getting a negative out of the box and into the test camera, a Kodak Autographic No. 3A (1918-27) which is nearly as big as the Polaroid.

I shot a test and then psyched myself out that I didn’t have the emulsion facing the subject. Just to be sure, I put the beast back in the dark bag, turned the film over and shot it again. I shot the same subject so I still don’t know if I had it right the first time.

My meter app doesn’t have ISO 3000 so I guesstimated that the film would have lost some speed and used 2500. I used the fastest shutter on the old Kodak, 1/100 second and f/16. That was really fortunate since the aperture on the camera is labeled in US (Universal System) units not f-stops. I have a screen grab of an old table comparing aperture systems somewhere. At least I didn’t have to stop everything and find it because I remembered that f-stops and US cross each other at 16

I was getting impatient so I used HC-110 B for 4.5 minutes this time. The framing is terrible but the blobs of dark on the negative are definitely the kitchen lights.

A negative!

A negative!

Fugly, but it's a photograph.

Fugly, but it’s a photograph.

Did I prove anything? Yeah sort of. I know old Polaroid negatives will produce an image. Is it useful information? Probably not to anyone but me but that was the point. Photography forums (fora?) are as bad as Apple discussion groups. There’s always some snarky little bitch who says, “Why waste time? Just go buy X”. That misses the point. I want to know. I already know I can go buy something — there’s no challenge in that.